[目的]优化水牛奶离心除菌工艺参数,以实现除菌效果并保障产品营养品质。[方法]以水牛奶为原料,采用利乐Bactofuge BBPRX 714H6B-340离心除菌机,选取离心转速(A)、离心温度(B)、排渣周期(C)为影响因素,以芽孢去除率(Y1)、细菌总数去除率(Y2)为除菌评价指标,通过单因素试验确定各因素水平范围,结合Box-Behnken响应面设计(BBD)进行3因素3水平试验,采用Design-Expert 13软件拟合回归模型、分析因素交互作用并求解最优工艺。[结果]最优离心除菌工艺参数为离心转速4 850 r/min、离心温度55.5 ℃、排渣周期19.7 min,在此条件下,芽孢去除率为96.79%,菌落总数去除率为94.76%,实际值与模型预测值相对误差均小于5%,模型拟合度高(R²≥0.98),可靠性强。离心转速与排渣周期对水牛奶除菌效果存在显著协同效应。[结论]该工艺高效、温和,可在保证水牛奶除菌效果的同时,最大限度地保留其天然营养成分,为水牛奶工业化离心除菌生产提供理论依据与技术支撑。
[Objective]To optimize the centrifugal sterilization process parameters of buffalo milk to achieve sterilization effect and ensure the nutritional quality of the product.[Method]Using buffalo milk as the raw material,the Tetra Pak Bactofuge BBPRX 714H6B-340 centrifugal sterilization machine was adopted. The centrifugal speed(A),centrifugal temperature(B)and discharge cycle(C)were selected as the influencing factors. The spore removal rate(Y1)and total bacterial count removal rate(Y2)were used as the sterilization evaluation indicators. Through single-factor experiments,the ranges of each factor levels were determined. Combined with the Box-Behnken response surface design(BBD),a three-factor three-level experiment was conducted. The regression model was fitted using Design-Expert 13 software,the factor interactions were analyzed,and the optimal process was solved.[Result]The optimal centrifugal sterilization process parameters were centrifugal speed of 4 850 r/min,centrifugal temperature of 55.5 ℃,and discharge cycle of 19.7 min. Under these conditions,the spore removal rate was 96.79%,and the total bacterial count removal rate was 94.76%. The relative errors between the actual values and the model predicted values were all less than 5%. The model fitting degree was high(R²≥0.98),and the reliability was strong. There was a significant synergistic effect of centrifugal speed and discharge cycle on the sterilization effect of buffalo milk.[Conclusion]This process was efficient and mild,and it could ensure the sterilization effect of buffalo milk while maximizing the retention of its natural nutritional components. It provided theoretical basis and technical support for the industrial centrifugal sterilization production of buffalo milk.
[1] 杨炳壮. 全球水牛业发展现状与我国奶水牛业的发展趋势[J].广西农学报,2011,26(1):40-48.
[2] 谢向长. 灵山县生乳致病菌污染状况分析[J].医药前沿,2016,6(1):32-33.
[3] 赵瑾德,张淑丽,贺凯茹,等.灭菌乳中枯草芽孢杆菌危害与控制研究进展[J].乳业科学与技术,2024,47(4):59-65.
[4] 胡伟,黄润,李梅.除菌分离机在学生奶生产中除菌效果的研究[J].中国食品工业,2016(5):53-55.
[5] Torres-Anjel M J,Hedrick T I.Spore removal by centrifugation and its effect on ultra-high temperature commercial sterilization of milk[J].Journal of Dairy Science,1971,54(3):326-330.
[6] 李晓东. 乳品工艺学[M].北京:科学出版社,2011.
[7] 任璐,于鹏,刘振民,等.离心除菌技术在巴氏杀菌乳生产中的应用[J].食品研究与开发,2018,39(1):46-50.
[8] 利乐中国有限公司.利乐Bactofuge BB 718离心除菌机操作手册[Z].2018.
[9] 田明. 基于Box-Behnken响应面设计结合网络药理学的雪菊复合饮料的研究[D].乌鲁木齐:新疆农业大学,2022.
[10] 王海燕,陈重,余春生,等.Box-Behnken响应面设计法优化商陆鲜制饮片工艺[J].中南农业科技,2023,44(3):50-55.
[11] NY/T1331—2007乳与乳制品中嗜冷菌、需氧芽孢及嗜热需氧芽孢数的测定[S].
[12] GB4789.2—2022食品安全国家标准食品微生物学检验菌落总数测定[S].
[13] GB5009.5—2025食品安全国家标准食品中蛋白质的测定[S].
[14] 内蒙古蒙牛乳业(集团)股份有限公司.一种液体奶及其制备方法:发明专利申请公布CN 112913917 A[P].2021-06-08.
[15] 内蒙古伊利实业集团股份有限公司.一种低温巴氏奶及其制备方法:发明专利申请公布CN 112868762 A[P].2021-06-01.
[16] 姚春杰,李全阳,黄忠闯.广西水牛奶与荷斯坦牛奶工艺学特性比较[J].中国乳品工业,2011,39(3):30-33,55.
[17] 裴昱博,于淼,张国芳,等.水牛奶营养物质及其制品研究现状[J].食品工业科技,2024,45(18):344-354.
[18] 李全阳,张宪省,刘小玲,等.水牛奶组分及其功能特性研究进展[J].食品科学,2011,32(3):305-309.
[19] 孙玥,吴华星,王荣春,等.离心除菌UHT乳贮藏期内乳蛋白组成的变化[J].中国乳品工业,2022,50(1):24-28,36.
[20] GB 25190—2010食品安全国家标准灭菌乳(含第1、2号修改单)[S].